The AMC Forum - Looking for help with Crossram install
 
Welcome, Guest. Please Login.
YaBB - Yet another Bulletin Board
02/20/18 at 23:33:09
News: 07/13/2009: Member Registration is now manual. Please email me if you're looking to sign up: amcforumAThotmail.com
Home Help Search Login


Pages: 1
Send Topic Print
Looking for help with Crossram install (Read 4470 times)
6spdamc
AMCrazy
**


American Motors
Corporation

Posts: 162
Gender: male
Spencerport, NY
Looking for help with Crossram install
05/25/09 at 04:01:11
 
I believe I have everything I need except maybe the throttle linkage??....I have upper/lower intake, both carbs and traditional crossram linkage but need to know how to hook up linkage to accel cable...do I need another piece or _____.  some people have told me to put a aftermarket plate under carb #1 and hook up my stock accel cable to it and the crossram linkage will connect both carbs together...sounds like it will work but doesn't seem like the way I've seen it done...Please e-mail or call me if you have any experience with this and/or any pictures.  Thank you in advance, Dan, dcovert1@rochester.rr.com or 585-617-4393
Back to top
 
 

68 Rogue, 69 BBO AMX, 390, 4 spd AC & Rally Pak, 70 RWB Rebel Machine, 4 spd w/3.91's, 70 RWB AMX 390,Richmond Gear 6 spd,Coilovers,17's,Dana 60,Crossram
Email   IP Logged
firecapt321
Forum Veteran
High Performance
****


The Ken Killer

Posts: 5571
Gender: male
Savannah, GA
Re: Looking for help with Crossram install
Reply #1 - 05/30/09 at 18:43:58
 
You probably want to make this post up in the engine repair thread.... a lot of people dont look down here as you can tell by no replies to your question.....JMO
Back to top
 
 

12.9 @ 111mph
Street Tires, Stock Stall Mopar Converter, 3.15's, Foot Lock System and Auto Zone's Finest Shocks, Crossing the line at 4000 rpm's..... lmao
Email   IP Logged
javhunter74
AMCrazy
**


American Motors
Corporation

Posts: 327
Gender: male
Savannah, GA
Re: Looking for help with Crossram install
Reply #2 - 06/03/09 at 19:46:44
 
PM sent.
Back to top
 
 

Charles
1974 AMC Javelin-Owned since 1985.
1996 Volvo 850 Turbo Wagon
Email   IP Logged
paul70amx
AMCer
*


American Motors
Corporation

Posts: 39
Gender: male
Davie, FL
Re: Looking for help with Crossram install
Reply #3 - 05/12/10 at 22:24:31
 
I had to make up my own cable holder from the stock one, ( 70 amx ) wish I had some photos of the installation, too many years ago. I will look over any photos i have and maybe find one that will help.
Back to top
 
 

1970 AMX, 410, 4 speed
Email   IP Logged
crossramrambler
AMCrazy
**


American Motors
Corporation

Posts: 175
Gender: male
Reno,Nv
Re: Looking for help with Crossram install
Reply #4 - 07/05/10 at 23:07:24
 
I used some linkage I bought off e-bay. It is splined so it can't move the stock linkage took me for a ride when one carb stayed wide open. The cable holder can be bought from summit or jegs........Jim
 
 
 
 
 
 

 
 
Back to top
 
 

Email   IP Logged
SC397
AMCrazy
**


American Motors
Corporation

Posts: 269
Gender: male
Blissfield, MI
Re: Looking for help with Crossram install
Reply #5 - 08/26/10 at 00:53:54
 
I can give you dimensions of the original bell crank and linkage if you want it.  Or, take pictures etc.
Back to top
 
 
Email   IP Logged
Pages: 1
Send Topic Print