" and best of all nobody broke down "

Didnt you remember seeing my Gremlin there haha .
Here,s the story 4 brand new brafasco , not princess auto , not crappy tire , grade 8 bolts , cut to length by hand with hack saw and oiled on the cuts .Tapered on the ends , double checked the length of each one to make sure it didnt bottom out . Chased , not tapped , holes in converter . 2 stripes of blue loctite on each bolt , torked 5 ft lbs over specs according to a 73 tsm , tigtened in a criss cross pattern twice , to double check it , not in a circular pattern . Junk parts runs a best so far of 12.21 . Next run the converter bolts back out . At first I thought the flex plate broke cause it was really rattly sounding . Figger it out , tighten bolts , miss 1st round of elims by like just a few minutes .

.
Made another for fun run , an a bolt backed out again , Time for a new flex plate .
But me an Ding had a blast . Gremlin spun on 4 out of 5 runs .
Had a great time . I,ll have to see tommorow if I got a tan from what the weather people called a cloudy day . Weather was amazing Got to see every one again .
A BIG Thanks out to Ken P , and crew for putting this event on ..77.